Tempered glass
Tempered glass
You can order tempered glass on our website. Tempered glass is also known as construction glass, tempered glass or sekurit glass. This glass is 4 to 5 times stronger than unhardened glass. This makes it suitable for, for example, shelves, (shower) doors, (shower) walls, wall coverings, furniture doors, etc. etc. This glass is sensitive to point load and will burst into 10,000 pieces if broken.
Tempered glass is made from unhardened glass. First, the glass plate is completely made to measure, including holes, edge finishing, etc. Then it is heated and forced to cool. This creates push and pull stresses in the glass that give it its strength. After hardening you can no longer adjust the glass. You can still paint it but can no longer make it smaller, no drilling holes or other operations. Then you break the tensions in the glass and it will relax, resulting in a glass breakage. Therefore measure everything carefully before you order. After the tempering process nothing can be adjusted anymore.
Tempered glass is therefore not in stock in standard plates. You cannot cut and change the size. Logically, this also ensures a slightly longer delivery time than unhardened glass. This is because an extra manufacturing step is required and this takes some extra production time.
-
Tempered Silvit clear 4 mmTempered patterned glass with bark texture, thickness 4 mm, custom made
€200.50per m² -
Tempered Byzantijn fine clear 4 mmTempered glass with fine hammered pattern, thickness 4 mm, custom made
€168.00per m² -
Tempered Byzantijn coarse clear 4 mmTempered glass with coarse hammered pattern, thickness 4 mm, custom made
€168.00per m² -
Tempered Kathedraal clear 4 mmTempered glass with fine wavy pattern, thickness 4 mm, custom made
€150.75per m² -
Tempered Kathedraal clear 6 mmTempered glass with fine wavy pattern, thickness 6 mm, custom made
€306.50per m² -
Tempered Kathedraal clear 8 mmTempered glass with fine wavy pattern, thickness 8 mm, custom made
€414.25per m² -
Tempered Delta clear 4 mmTempered patterned glass with coarse lines, thickness 4 mm, custom made
€168.00per m² -
Tempered Monumental N clear 4 mmTempered patterned glass with large facets, thickness 4 mm, custom made
€144.50per m²
Mounting tempered glass with glass clamps
Want to fix a tempered glass panel without cut-outs in the glass? You can with glass clamps. Our glass clamps take tempered glass of 6, 8, 10 and 12 mm; you choose the glass thickness with the clamp. Please note: in a fall-through situation, such as a balustrade, balcony, staircase or other difference in level, fall-through resistant glass is required: laminated or tempered-laminated glass. The right composition follows from NEN 2608.