Shower sealing profile 8863KU0-8-2010
Pauli+Sohn seal underside showerdoor, for glass thickness 6 and 8 mm, length 2010 mm(More information)
- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
This shower sealing profile is from the German brand Pauli + Sohn. This seal has a leakage sill and is used for watertight sealing underneath a shower door. The sealing profile can only be placed underneath the door. The profile has two functional aspects; a "roof" through which the sloping water from the shower door runs about 10 mm from the door to the floor, and a sealing strip at the bottom so that water cannot pass under the door.
The sealing profile and the "roof" are stiff and cannot be bent. The seal on the bottom is flexible. The best result to use this profile is with an existing sill or upright edge of the shower tray (or bath edge with a bath folding wall). The curve under the profile is very flexible and provides a watertight seal. If you have a water barrier in your shower, you better choose profile with no. 8864KU0.
Main features of Pauli+Sohn shower sealing profile 8863KU0-8-2010:
Plastic shower sealing profile with flexible seal on the bottom
Sealing for inward and / or outward opening shower door
Suitable for glass thickness 6 and 8 mm
Length: 2010 mm (201 cm)
When installing a sealing profile, you must have sufficient space between the glass and wall/shower enclosure. This space differs per situation. Look at the technical detail photo for the details
Can be ordered per piece, the mentioned price is a piece price!
This Pauli+Sohn shower sealing profile 8863KU0-8-2010 is delivered:
In the indicated size
Wrapped with sealing foil or in a cardboard tube
Points of attention:
If you are going to replace an existing profile; make sure you have the necessary space to install this seal
When you order a new door; use the correct glass deduction to ensure that everything fits properly
Choose the correct seal based on the glass thickness
The part that slides over the glass is hard plastic and cannot be bent
It is best to cut this profile to size with plinth pliers
|Brand||Pauli + Sohn|
|Plaatsing||on shower door|
|Direction||inwards and/or outwards|
|Glass thickness||6 - 8 mm|
|Scope of supply||per 1 piece|
|Unit of measurement||per piece|
|Packed in a||schrink wrap|
|Expected delivery time||1-3 working days|
|Shipping price Netherlands||11,50|
|Shipping price Belgium||14,00|
|Shipping price rest of Europe||This product can only be sent to NL and BE|
Can my order of standard product(s) be delivered?
Yes, of course! We deliver standard products throughout the European Union (with the exception of products longer than 150 cm). In the Netherlands (with the exception of the Waddeneilanden) and the Dutch-speaking part of Belgium we can deliver length products up to a length of 6 meters. You should think of sealing profiles, U-profiles and mirror profiles. We have a limited stock ourselves, but we can still deliver many products relatively quickly because our reliable suppliers do have an extensive range in stock. In most cases they can ship this directly to your address.
If products are shipped from our own stock, we use Post NL. If Post NL does their job well, you should receive the package within 2 to 3 working days. We have no control over this ourselves and are really dependent on the performance of Post NL's employees. We can only ensure that the products are collected and brought to Post NL as soon as possible. We always send our packages with a track-and-trace option and share this track-and-trace code with our customer. This will keep you informed by post.nl about the progress of your package. We never send anything by postage stamp. Although this is a lot cheaper, you never know where your package is. We have had bad experiences in the past with postage stamps where envelopes were regularly not delivered. We therefore do not use this method of shipping.
If products are shipped directly from a supplier, they will ship it to you via another shipping company. Most companies will also share a track and trace with you from their carrier. When products are not in stock with us and/or our suppliers, they are ordered from the factory. It will be sent to you as soon as they are available. This results in a slightly longer delivery time. We try to state the current delivery time in the products as accurately as possible.
Where can the order for my standard product(s) be delivered?
We can have most standard products delivered throughout the European Union by Post NL. They work abroad with reliable carriers, so we can also send packages to in example Germany, France and Austria. However, we are limited in shipping products longer than 150 cm. As a result, we cannot send stabilizing bars, sealing profiles, U-profiles and mirror profiles abroad from our stock that are longer than 150 cm. With the exception of the whole of the Netherlands and the northern part of Belgium; here we can supply lengths up to 6 meters long.
Products that are sent directly from Bohle can be delivered in the Benelux, even if this concerns profiles that are longer than 150 cm. The rates of length transport from Bohle are quite expensive. The delivery costs that we pass on are the actual costs that Bohle also charges us.
In the products you can find under the tab "more information", where the product can be delivered and what the costs are.
Can I also pick up the order for standard product(s)?
That too is possible! On the payment page, choose the option that you would like to pick up the order. There are two pick-up options: The pick-up center in Oosterhout (near Breda) or at GlasBoertje.nl in 's-Hertogenbosch. These options are also stated on the payment page. As soon as we have an idea of the date that your order is ready for collection, we will inform you about this. We will also send you the address, opening times and additional information by e-mail.
Can I pick up all products at the collection locations?
Unfortunately, that doesn't always work. Some products are not in stock at all pick-up locations and must be special ordered or delivered to the location. It may then take a little longer before your order is ready.
There are also products that cannot be picked up in Oosterhout. These are products that are not in the range of the company in Oosterhout. In that case, one or more pick-up locations on the payment page may not be available, so that you can only choose to deliver the goods or to collect them in 's-Hertogenbosch.
It is possible that you want to pick up several products at a location, of which one of the products may not be in stock at that location. In that case you can still choose that location, but we will have to order the item that is not available there and have it delivered there. In that case, we must pass on the shipping costs that our supplier has also charged us. Costs can then be charged on the payment page when you pick up an order. These costs are then mentioned at the pick-up locations.
Be aware! The pick-up locations are somewhat limited in opening hours. These are business locations that have normal office hours and some locations are closed on Friday afternoons at 4:00 PM. Keep this in mind if you choose to pick up. Picking up at GlasBoertje is of course also possible, then we are more flexible regarding times. The opening times may differ around and during the holidays! The opening times are stated on the payment page, under the pick-up options.
When you choose the pick-up option, it goes without saying that the risk of breakage and/or damage is also transferred upon collection. When picking up your order, check carefully whether it is complete and undamaged before you take it with you.