P+S Pontere 8410 shower hinge (glass-glass), chrome

Art. no.

Suitable for 8 and 10 mm glass thickness, Brass, polished chrome, capacity 2 hinges: max. 50 kg

More information
per piece
Delivery: 1-3 working days

This showerdoor hinge from Pauli + Sohn is a quality product from Germany and comes from the Pontere series. This series is very complete and has a suitable glass hinge for almost every situation. The Pontere series is suitable for larger and heavier shower doors.

This hinge is sold per piece and the mentioned price is a 1 piece price. However, the specifications listed are based on the use of two hinges. Also logical because a door with 1 hinge would not work.


Main features Pauli + Sohn Pontere 8410 MS7 showerdoor hinge glass-glass (chrome):

tick-marks  Showerdoor hinge for mounting a glass shower door on a glass wall, mounting at 90 degrees
tick-marks  Double acting; Rotates 90 degrees inward and 90 degrees outward (total 180 degrees)
tick-marks  Adjustable zero position; self-closing in the last centimeters towards the zero position
tick-marks  Brass material, polished chrome finish
tick-marks  Suitable for glass thickness: 8 and 10 mm (we recommend using 8 mm for a shower door)
tick-marks  Maximum door weight: 50 kg (with two hinges)
tick-marks  Max. size showerdoor with 8 & 10 mm glass: 1000 x 2000 mm
tick-marks  Pay attention! The cut-out as seen in the image is based on 8 mm glass thickness
tick-marks  To be bought per piece, the mentioned price is the price for 1 piece! And not for the pair!


Pauli + Sohn Pontere 8410 MS7 showerdoor hinge glass-glass (chrome) comes with:

tick-marks  One showerdoor hinge, finishing polished chrome
tick-marks  Two socket head screws for clamping the hinge to the glass wall and two socket head screws for clamping the hinge to the glass door
tick-marks  Assembly gaskets that correspond to the glass thickness you specified
tick-marks  Mounting instructions


Points of attention:

tick-marks  Make sure you use the correct glass deduction when ordering the glass door and shower enclosure. For example, if you install a sealing profile, you need a different glass deduction than if you are going to install a door without a seal. If you cannot find a solution, ask us for advice
tick-marks  Read the mounting manual in advance. It contains useful tips
tick-marks  Two hinges are always used for a showerdoor up to a height of 2000 mm (200 cm). If the door is higher then 2000 mm, three hinges are required. You then get a better load-bearing capacity and the pressure when opening / closing the door is better distributed over three hinges
tick-marks  Work with precision, take your time, use the right tools and ask someone to help you when you need to move and mount the glass door
tick-marks  NEVER let the glass door rest on the floor, always place something in between it such as a wooden slat, blanket etc. If glass is put on a hard surface, the risk of damage is very high. This also applies to any contact with the wall and other hard surfaces. Protect the glass at all times, it's a vulnerable material !

More Information
Art. no.200321
BrandPauli + Sohn
Mounting of ... to ....Glass door to glass wall
Degrees90 °
Suitable types of glassinstallation glass (tempered glass incl. 5 holes and edge finishing)
Glass thickness in mm8, 10
Adjustable zero positionYes
Capacity of 2 pieces (KG)50
Max. size showerdoor with 8 mm glass1000 x 2000 mm (w x h)
Max. size showerdoor with 10 mm glass1000 x 2000 mm (w x h)
Finishingglossy chrome
Expected delivery time1-3 working days
Scope of supplyper 1 piece
Unit of measurementper piece
Packed in abox
Warranty3 years
Shipping price Netherlands11,50
Shipping price Belgium14,00
Shipping price rest of EuropeSee the check-out page for actual pricing
Write Your Own Review
You're reviewing:P+S Pontere 8410 shower hinge (glass-glass), chrome
Customer Questions
No Questions

test Engels