Mirror heating 274 x 274 mm

Prevent condensation on the mirror, easy to apply (self-adhesive), 12.5 Watt, 230 Volt

(More information)
Art. no.
per piece
Delivery: 1 - 3 working days
  • Free shipment from € 500,- (incl. VAT)
  • Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
  • Relatively short delivery times
  • Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard

With a mirror heating you prevent condensation on your mirror. The heating pad heats the surface of the mirror so that water vapor will not settle on this warm part of the mirror. The mirror heating only heats the part where the heating pad is behind with an edge around 5 - 7 cm. That is also sufficient because ultimately you want part of the mirror to be condensation-free so that you can see yourself in the mirror. The entire mirror does not have to be condensation-free for this.

The heating pad does need space at the back so that the residual heat can be dissipated. It is therefore not a good idea to completely enclose / integrate / glue a heating system. It is best to place the mirror heating pad in combination with a blind mounting set.


Main features of the mirror heating 274 x 274 mm:

tick-marks  Prevents condensation on the mirror
tick-marks  Ideally suited for damp areas such as a bathroom (IPx4 certification)
tick-marks  Self-regulating so no thermostat required
tick-marks  Easy to apply (self-adhesive)
tick-marks  Suitable for mirrors without safety film
tick-marks  Connection: directly to the bathroom light switch
tick-marks  Preferably used in combination with a blind mirror mounting set
tick-marks  Size 27.4 x 27.4 cm
tick-marks  Thickness of the pad is approx. 1 mm
tick-marks  Thickness of the connection point from the pad to the cord of the mat: approx. 8 mm (at least 8 mm space behind the mirror is required !!)


This mirror heating 274 x 274 mm comes with:

tick-marks  1 mat of 274 x 274 mm (27.4 x 27.4 cm)
tick-marks  2-core connection cable of approx. 88 cm long
tick-marks  An installation manual


Points of attention:

tick-marks  Do not cut the heating, it cannot be cut to size
tick-marks  Stick the heating pad on that part that you want condensation-free, measure this well in advance
tick-marks  The heating pad must not be in direct contact with mounting materials such as the blind mirror mounting kit
tick-marks  Tiling, plastering, gluing or otherwise enclosing the heating is not wise. Accumulating residual heat can cause the mirror to break over time
tick-marks  The heating pad is self-adhesive. This adhesive layer is quite strong. Stick the heating pad on well in 1 go
tick-marks  You connect the heating pad to the light point behind your mirror. This light fixture is operated with the light button of the bathroom, which you normally use to operate the lighting above the sink. There is no separate on / off switch on the heating pad itself. So you are completely dependent on the control from your fixed switch of the bathroom
tick-marks  Don´t connect the heating pad to a light dimmer, the heating will not work properly on a dimmer switch

More information
Art. no. 234102
Dimension 274 x 274 mm
Usage 12,5 Watt
Voltage 230 V
Safety Class IPx4 (protection against water and for use in wet areas)
Other standards Supplied according to CE standard, Kema Keur and the European standard EN60335-1 / EN60335-2-96
Brand GlasBoertje
Packaging unpackaged
Scope of supply per 1 piece
Unit of measurement per piece
Expected delivery time 1 - 3 working days
Shipping price Netherlands 9,75
Shipping price Belgium 12,75
Shipping price rest of Europe See the check-out page for actual pricing
No questions

Can my order of standard product(s) be delivered?

Yes, of course! We deliver standard products throughout the European Union (with the exception of products longer than 150 cm). In the Netherlands (with the exception of the Waddeneilanden) and the Dutch-speaking part of Belgium we can deliver length products up to a length of 6 meters. You should think of sealing profiles, U-profiles and mirror profiles. We have a limited stock ourselves, but we can still deliver many products relatively quickly because our reliable suppliers do have an extensive range in stock. In most cases they can ship this directly to your address.

If products are shipped from our own stock, we use Post NL. If Post NL does their job well, you should receive the package within 2 to 3 working days. We have no control over this ourselves and are really dependent on the performance of Post NL's employees. We can only ensure that the products are collected and brought to Post NL as soon as possible. We always send our packages with a track-and-trace option and share this track-and-trace code with our customer. This will keep you informed by post.nl about the progress of your package. We never send anything by postage stamp. Although this is a lot cheaper, you never know where your package is. We have had bad experiences in the past with postage stamps where envelopes were regularly not delivered. We therefore do not use this method of shipping.

If products are shipped directly from a supplier, they will ship it to you via another shipping company. Most companies will also share a track and trace with you from their carrier. When products are not in stock with us and/or our suppliers, they are ordered from the factory. It will be sent to you as soon as they are available. This results in a slightly longer delivery time. We try to state the current delivery time in the products as accurately as possible.


Where can the order for my standard product(s) be delivered?

We can have most standard products delivered throughout the European Union by Post NL. They work abroad with reliable carriers, so we can also send packages to in example Germany, France and Austria. However, we are limited in shipping products longer than 150 cm. As a result, we cannot send stabilizing bars, sealing profiles, U-profiles and mirror profiles abroad from our stock that are longer than 150 cm. With the exception of the whole of the Netherlands and the northern part of Belgium; here we can supply lengths up to 6 meters long.

Products that are sent directly from Bohle can be delivered in the Benelux, even if this concerns profiles that are longer than 150 cm. The rates of length transport from Bohle are quite expensive. The delivery costs that we pass on are the actual costs that Bohle also charges us.

In the products you can find under the tab "more information", where the product can be delivered and what the costs are.


Can I also pick up the order for standard product(s)?

That too is possible! On the payment page, choose the option that you would like to pick up the order. There are two pick-up options: The pick-up center in Oosterhout (near Breda) or at GlasBoertje.nl in 's-Hertogenbosch. These options are also stated on the payment page. As soon as we have an idea of ​​the date that your order is ready for collection, we will inform you about this. We will also send you the address, opening times and additional information by e-mail.


Can I pick up all products at the collection locations?

Unfortunately, that doesn't always work. Some products are not in stock at all pick-up locations and must be special ordered or delivered to the location. It may then take a little longer before your order is ready.
There are also products that cannot be picked up in Oosterhout. These are products that are not in the range of the company in Oosterhout. In that case, one or more pick-up locations on the payment page may not be available, so that you can only choose to deliver the goods or to collect them in 's-Hertogenbosch.

It is possible that you want to pick up several products at a location, of which one of the products may not be in stock at that location. In that case you can still choose that location, but we will have to order the item that is not available there and have it delivered there. In that case, we must pass on the shipping costs that our supplier has also charged us. Costs can then be charged on the payment page when you pick up an order. These costs are then mentioned at the pick-up locations.

Be aware! The pick-up locations are somewhat limited in opening hours. These are business locations that have normal office hours and some locations are closed on Friday afternoons at 4:00 PM. Keep this in mind if you choose to pick up. Picking up at GlasBoertje is of course also possible, then we are more flexible regarding times. The opening times may differ around and during the holidays! The opening times are stated on the payment page, under the pick-up options.

When you choose the pick-up option, it goes without saying that the risk of breakage and/or damage is also transferred upon collection. When picking up your order, check carefully whether it is complete and undamaged before you take it with you.