Aluminum U-profile 25x16x25 mm, black structure, 6 meter

Aluminum, black structure finished, can only be ordered as a 6 meter profile

(more information)
Art. no.
207720
€63.00
per piece
Delivery: 2 - 7 working days
  • Free shipment from € 500,- (incl. VAT)
  • Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
  • Relatively short delivery times
  • Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard

This aluminum U-profile of 25x16x25 mm black structure (outer size) has an inner size of 23.5 x 13 x 23.5 mm. This profile is often used to make an industrial steel-look door or wall. Due to the inner size of 13 mm you can slide it well over a tempered glass panel of 12 mm. You first apply the sealant to the profile and then slide the profile over the glass.

You can combine this with the matt black flat profile 25 x 2 mm to create a surface division.

 

Features aluminum U-profile 25x16x25 mm (black structure):

  • Aluminum U-shaped profile
  • Black structure finished
  • Suitable for indoor and outdoor use
  • Outer size is 25 x 16 x 25 mm
  • Inner size is 23.5 x 13 x 23.5 mm
  • Material thickness is 1.5 mm
  • The mentioned price is the price for 1 profile of 6 meters

 

Aluminum U-profile 25x16x25 mm, black structure is delivered:

  • As 1 profiel of 6 meter in length

 

Points of attention:

  • With this profile no cover caps are available for the ends. You will have to seal it off or cut a cover from a piece of residual profile that you can mount on the end side
  • If you are going to place a glass panel in the profile, think carefully about the correct glass size. You will have to use a small glass deduction of at least approx. 2 - 4 mm (partly depending on the screw head that can protrude into the profile). If you apply the head in a recessed position, at least 2 mm is sufficient
  • Preferably you place a mounting gasket under the glass in the profile. You can also place this gasket on the side of the glass to properly position the glass pane in the profile before you seal it permanently. If you use this mounting gasket between the glass and the profile, take into account an extra glass deduction of at least 2 mm or 3 mm (depending on the thickness of the gasket used for it)