€92.00
per m²
Delivery: 7 - 10 working days
- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
Satin glass 3 mm is glass with one side etched by treating it with etching liquid. This etching gives a matte side on one side of the glass. This side lets light through, but you can't see through it. This glass is also called "frosted glass 3 mm".
If you have the option to order 4 mm satinglass then that is a better choice.
Features of satin glass 3 mm:
- Satin glass of 3 mm thickness with a matte finish on one side. This mattering is applied by etching the glass, this is called etched glass
- One side is matted with the surface feeling a little rough. The other side is just like normal glass
- WATCH OUT!! Normal glass has been used in this type of glass. As a result, there will be a slight greenish discoloration which may slightly deviate from the reality of the image on the website
- Suitable for indoor application, limited as outdoor application (the satin-finished side becomes limited transparent when this side gets wet. When this side has dried, the matted side gets it´s frosted look again)
- Standard unfinished/sharp edges, various edge finishings possible
- This glass weighs 7.5 kg per m²
- The mentioned price is a m² price
- Can be custom-made in the glass configurator
Satin glass 3 mm is provided by us:
- Custom made
- Delivered according to specified specification (note! For glass production tolerances apply!)
- Delivered at delivery address. Pick-up is also possible, the options are mentioned on the payment page
Points of attention for 3 mm satin glass:
- WATCH OUT!! Normal glass has been used in this type of glass. As a result, there will be a slight greenish discoloration which may slightly deviate from the reality of the image on the website
- When the satin side of the glass gets wet, the glass will become temporarily transparent. Once the water has dried again, it will regain its original matt appearance. This is not a fault of the glass, but this is part of this product. You can't help it. If you have a situation with a wet and dry side, preferably place the matted side on the dry side
- You are responsible at all times for applying the safety standards and requirements applicable in your country! In the Netherlands, this includes NEN-3569:2011 (“Vlakglas voor gebouwen – Risicobeperking van lichamelijk letsel door brekend en vallend glas – Eisen” voor Nederland).
- For the production of custom glass, tolerances have been determined within the glass industry in terms of dimensions, quality and finish. These are industry-wide and are used by all glass companies. Please note that it is possible that glass may have a small size deviation (approx. 1 - 2 mm), and certain miniscule damages cannot always be claimed
- Think carefully about the right glass size. Size changes are no longer possible once your order has gone into production
- Within the glass industry it is customary to calculate a minimum area per piece. This is necessary because the handling of an order is always necessary and this prevents a glass plate from costing € 1.50, for example, while the actual production costs are much higher. The minimum area to be calculated differs per product and is stated under the tab "More information" on the product page