Shower sealing profile 8864KU0-8-2010

Pauli+Sohn seal underside showerdoor, for glass thickness 6 and 8 mm, length 2010 mm

(more information)
Art. no.
201605
€25.75
per piece
Delivery: 1 - 3 working days
  • Free shipment from € 500,- (incl. VAT)
  • Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
  • Relatively short delivery times
  • Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard

This shower sealing profile is from the German brand Pauli + Sohn. This seal has a leakage sill and is used for watertight sealing underneath a shower door. The sealing profile can only be placed underneath the door. The profile has two functional aspects; a "roof" through which the sloping water from the shower door runs about 10 mm from the door to the floor, and a sealing strip at the bottom so that water cannot pass under the door.

The sealing profile and the "roof" itself are stiff and cannot be bent. The seal on the bottom is flexible. You get the best result to combine this profile with a water barrier or to use it with an existing sill or upright edge of the shower tray (or bath edge with a bath folding wall). As a result, the seal will not touch the floor and / or shower tray, but will rotate over it without touching the floor when the door opens or closes.

 

Features of Pauli+Sohn shower sealing profile 8864KU0-8-2010:

  • Plastic shower sealing profile with drainage and flexible seal on the bottom
  • Sealing for inward and / or outward opening shower door
  • Suitable for glass thickness 6 and 8 mm
  • Length: 2010 mm (201 cm)
  • When installing a sealing profile, you must have sufficient space between the glass door and the floor. This space differs per situation. Look at the technical detail photo for this
  • Can be ordered per piece, the mentioned price is a piece price!

 

This Pauli+Sohn shower sealing profile 8864KU0-8-2010 is delivered:

  • In the indicated size
  • Wrapped with sealing foil or in a cardboard tube

 

Points of attention:

  • If you are going to replace an existing profile; make sure you have the necessary space to install this seal
  • When you order a new door; use the correct glass deduction to ensure that everything fits properly
  • Choose the correct seal based on the glass thickness
  • The part that slides over the glass is hard plastic and cannot be bent
  • It is best to cut this profile to size with plinth pliers