Assa Abloy Marine 3565 shower wall clamp (wall-glass), chrome

Glass-wall connection, suitable for 8/10/12 mm glass thickness, material: Brass, polished chrome

(more information)
Art. no.
202024
€52.00
per piece
Delivery: 1 - 3 working days
  • Free shipment from € 500,- (incl. VAT)
  • Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
  • Relatively short delivery times
  • Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard

Main features Stremler Marine 3265.30.0 chrome shower wall clamp (wall-glass):

  • Glass clamp for mounting a glass  shower enclosure on a wall, mounting at 180 degrees
  • Mounting plate equipped with oblong holes and fixation hole for optimal set possibility (including cover)
  • Suitable for glass thickness: 8 / 10 / 12 mm
  • Brand: Assa Abloy
  • Material: Brass
  • Finishing: polished chrome
  • Watch out! The sparing as seen in the image is based on 8 mm of glass thickness
  • To order per piece, the listed price is the price per piece!

 

Stremler Marine 3265.30.0 chrome shower wall clamp (wall-glass) comes with:

  • One glass clamp, material brass, finishing polished chrome
  • One bus screw for clamping the glass to the clamp to the glass
  • One socket screw for clamping the glass to the clamp to the glass
  • One cover to place over the screws
  • Two silicone stickers to secure the cover
  • Assembly manual

Points of attention:

  • Read the assembly manual in advance! It contains useful tips
  • Mounting plate provided with slotted holes and fixing hole for optimal set of possibilities (incl. Cover)
  • Use the right screws and plugs for your situation (the screws do NOT come with the clamp by default). Screws that are too small can break the glass panel. Pay attention to this!!
  • Mount the glass clamp on the glass plate, position the glass plate in the right place and draw the drill holes of the slotted holes on the wall. Now remove the glass plate, drill the holes of the slotted holes and place the correct plugs. Put the glass plate back in the right position and screw it hand-fast on the wall, position it (read manual!) and then tighten the plate against the wall
  • Work with policies and the right tools
  • Preferably use a long water level or a laser water level to properly position the glass panel
  • Make sure you use the correct glass deduction when ordering the glass wall. Ask us for advice if you don't come out
  • NEVER let the glass panel rest on the floor, always place something in between it such as a wooden slat, blanket etc. If glass is put on a hard surface, the risk of damage is very high. This also applies to contact with the wall and other hard surfaces. Protect the glass, it is and remains a vulnerable product