CBM matt black shower wall clamp (wall-glass)
Glass-wall connection, suitable for 8/10 mm glass thickness, material: stainless steel, matt black
(more information)- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
Main features CBM matt black shower wall clamp (wall-glass):
Glass clamp for mounting a glass showerdoor or shower enclosure on a wall, mounting at 90 degrees
Side mounting
Suitable for glass thickness: 8 / 10 mm
Brand: CBM
Material: stainles ssteel
Finishing: matt black
100% stainless steel, finished in colour RAL 9005 Mat (black)
Watch out! The sparing as seen in the image is based on 8 mm of glass thickness
To order per piece, the listed price is the price per piece!
CBM matt black shower wall clamp (wall-glass) comes with:
One glass clamp, material stainless steel, finishing matt black
Two bus screws for clamping the glass to the clamp
One socket screw for clamping the glass to the clamp
One cover to place over the screws
Two silicone stickers to secure the cover
Multiple assembly gaskets for the installation of the various glass thicknesses
Assembly manual
Points of attention:
Read the assembly manual in advance! It contains useful tips
Mounting plate provided with slotted holes and fixing hole for optimal set of possibilities (incl. Cover)
Use the right screws and plugs for your situation (the screws do NOT come with the clamp by default). Screws that are too small can break the glass panel. Pay attention to this!!
Mount the glass clamp on the glass plate, position the glass plate in the right place and draw the drill holes of the slotted holes on the wall. Now remove the glass plate, drill the holes of the slotted holes and place the correct plugs. Put the glass plate back in the right position and screw it hand-fast on the wall, position it (read manual!) and then tighten the plate against the wall
Work with policies and the right tools
Preferably use a long water level or a laser water level to properly position the glass panel
Make sure you use the correct glass deduction when ordering the glass wall. Ask us for advice if you don't come out
NEVER let the glass panel rest on the floor, always place something in between it such as a wooden slat, blanket etc. If glass is put on a hard surface, the risk of damage is very high. This also applies to contact with the wall and other hard surfaces. Protect the glass, it is and remains a vulnerable product