Nederlands 
My cart
You have no items in your shopping cart.
Click profile 70KLIK, 25x25x25 mm, matt black RAL9005 (6 meter)
Installation profile with click strip, for glass thickness 8.76 mm, 10 mm, 10.76 mm, 12 mm, or 12.76 mm
(more information)
Art. no.
213564
€112.00
per piece
Delivery: 2 - 7 working days
- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
This click profile of 25 x 25 x 25 mm (outer dimensions) is primarily used for mounting glass (partition) walls in an office environment. Of course, this profile can also be used in home situations, although a glass partition wall is less likely to be installed there. This profile is not suitable for the bathroom!
Ideally, you should only install this profile on the floor and the wall. On the ceiling, use a matching U-profile with rubbers, without a click frame. This way, you can insert the glass plate diagonally into the ceiling profile and let it rest on the floor profile. Then, you can place the rubbers in the ceiling profile and install the click frame from the floor profile. Finally, finish by placing the click frames on the sides. The major advantage of placing a U-profile without a click frame on the ceiling is that the plate stays in place during installation and does not fall. Use glass suction cups when placing the glass in the profiles, preferably work with at least 2 people, and handle with care.
This profile is supplied without rubbers as standard. Click profile 70CLICK can be used with different glass thicknesses by inserting different rubbers. In other words, when ordering the profile, you will need to separately order the desired rubber. When ordering the sealing rubber, you can specify the glass thickness you will be placing in it. The rubbers can be ordered per meter. This allows you, for example, to order 6 meters of click profile and use it for multiple glass thicknesses by ordering the correct rubbers.
Features click profile 70KLIK, 25 x 25 x 25 mm, matt black (RAL9005):
- Aluminum profile
- Matt black (RAL9005) finish
- Base profile with click frame, without rubbers!
- Suitable for glass thickness 8.76 mm, 10 mm, 10.76 mm, 12 mm, 12.76 mm
- In terms of glass type: tempered glass 10 and 12 mm, laminated glass 44.2, 55.2, and 66.2
- Suitable for indoor use (not for the bathroom)
- Outer dimensions are 25 x 25 x 25 mm (height, width, height)
- Material thickness is 1.5 mm
- Available in lengths of 6 meters, can be cut to size on-site (we do not provide custom cutting)
- Glass deduction on each side where this profile is placed: at least 8 mm
- The listed price is a unit price for 6 meters, with a click frame, however, without rubbers
Click profile 70KLIK, 25 x 25 x 25 mm, matt black (RAL9005) is:
- Supplied with a click frame but WITHOUT RUBBERS!
- Supplied per 6 meters
Points of attention for click profile 70KLIK, matt black (RAL9005):
- The profile is supplied without rubbers. Depending on the glass thickness, you can order the appropriate rubber separately
- The rubbers that go into this profile are different on each side of the glass. It is therefore necessary to consistently mount this profile in the correct manner
- Carefully consider the correct glass size when placing a pane in the profile. You will need to use a glass deduction of 14 mm on each side where the glass fits into this specific profile
- Before placing the glass in the profile, you will need to place glazing blocks. Use the 15 mm wide and 4 mm high tunnel blocks for this purpose