Glass support 30 x 16 x 27 mm, chrome
Brand SISO, for glass thickness 4 - 8 mm, material Zamak
(more information)
Art. no.
239901
€6.80
per piece
Delivery: 1 - 3 working days
- Buy 20 for €6.39 per piece each and save 6%
- Buy 40 for €6.12 per piece each and save 10%
- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
This glass support is quite small in size and has no extra support at the bottom. This makes the support barely noticeable and the choice goes quickly to this model. But this support does have reasonable limitations with the maximum carrying weight and the maximum dimensions of the glass shelf. Check carefully whether this support meets your requirements. We also have this support with extra support at the bottom, making it more suitable for larger shelves.
Features glass support 30 x 16 x 27 mm chrome:
- Placement on the back of the glass plate or placement on both sides
- For placement at the rear: glass shelf maximum 300 mm wide (30 cm), maximum 100 mm deep (10 cm), maximum carrying weight 7.5 kg. If 200 mm deep (20 cm), the maximum carrying weight is 3.75 kg.
- Dimensions of glass support: 30 x 16 x 27 mm
- Glass deduction because of material thickness support: - 4 mm per side where the support is mounted
- Suitable for glass thickness: 4 / 5 / 6 / 8 mm
- Hole for mounting screw on wall Ø 4 mm
- Use preferably in combination with tempered glass
- Finish: gloss chrome
- Also available in stainless steel effect and matte chrome
- Can be ordered per piece, the mentioned price is a piece price!
This glass support 30 x 16 x 27 mm chrome comes:
- In a box
- Including glass clamp screw with plastic cap
- Without wall mounting materials (no screw and plug)
Points of attention:
- Ensure that the glass support is mounted with the correct mounting materials
- Place the supports on a solid surface / wall
- When ordering your glass panel, pay attention to the thickness of the material of the clamp. You will have to deduct this material thickness from the size of your glass
- Properly distribute the position of the glass plate supports for optimum load capacity. Mount the two glass plate supports at a quarter of the way. Example: glass plate = 28 cm wide, then you mount the carriers at 28: 4 = 7 cm from the side, both from the left and from the right
- The mentioned maximum dimensions and carrying weight are based on tempered glass 6 mm
- For larger glass plates or a higher carrying weight, choose the clamps that have an extra support at the bottom or also place clamps on the side (and not just the back) of the glass plate