P+S Flamea+ 8194 shower wall clamp (wall-glass), glossy gold

Art. no.
200144

Glass-wall connection, suitable for 6/8/10 mm glass thickness, material: Zamac, glossy gold

More information
€132.00
per piece
Delivery: 1-3 working days

Main features P+S Flamea+ 8194 ZNPVD20 glossy gold shower wall clamp (wall-glass):

tick-marks  Glass clamp for mounting a glass shower enclosure on a wall, mounting at 60-100 degrees
tick-marks  Mounting plate equipped with oblong holes and fixation hole for optimal set possibility (including cover)
tick-marks  Suitable for glass thickness: 6 / 8 / 10 mm
tick-marks  Brand: Pauli + Sohn
tick-marks  Material: Zamac
tick-marks  Glossy gold finish
tick-marks  Watch out! The sparing as seen in the image is based on 8 mm of glass thickness
tick-marks  To order per piece, the listed price is the price per piece!

 

P+S Flamea+ 8194 ZNPVD20 glossy gold shower wall clamp (wall-glass) comes with:

tick-marks  One glass clamp, material zamac, finishing glossy gold
tick-marks  One bus screw for clamping the glass to the clamp to the glass
tick-marks  One socket screw for clamping the glass to the clamp to the glass
tick-marks  One cover to place over the screws
tick-marks  Two silicone stickers to secure the cover
tick-marks  Assembly manual

 

Points of attention:

tick-marks  Read the assembly manual in advance! It contains useful tips
tick-marks  Mounting plate provided with slotted holes and fixing hole for optimal set of possibilities (incl. Cover)
tick-marks  Use the right screws and plugs for your situation (the screws do NOT come with the clamp by default). Screws that are too small can break the glass panel. Pay attention to this!!
tick-marks  Mount the glass clamp on the glass plate, position the glass plate in the right place and draw the drill holes of the slotted holes on the wall. Now remove the glass plate, drill the holes of the slotted holes and place the correct plugs. Put the glass plate back in the right position and screw it hand-fast on the wall, position it (read manual!) and then tighten the plate against the wall
tick-marks  Work with policies and the right tools
tick-marks  Preferably use a long water level or a laser water level to properly position the glass panel
tick-marks  Make sure you use the correct glass deduction when ordering the glass wall. Ask us for advice if you don't come out
tick-marks  NEVER let the glass panel rest on the floor, always place something in between it such as a wooden slat, blanket etc. If glass is put on a hard surface, the risk of damage is very high. This also applies to contact with the wall and other hard surfaces. Protect the glass, it is and remains a vulnerable product

More Information
Art. no.200144
BrandPauli + Sohn
SeriesFlamea +
Mounting of ... to ....Glass wall to normal wall (non-glas wall)
Degrees90 °
Suitable types of glassinstallation glass (tempered glass incl. 5 holes and edge finishing)
Glass thickness in mm6, 8, 10
Stylesquare
MaterialZamak
Finishingglossy gold
Expected delivery time1-3 working days
Scope of supplyper 1 piece
Unit of measurementper piece
Packed in abox
Warranty3 years
Shipping price Netherlands11,50
Shipping price Belgium14,00
Shipping price rest of EuropeSee the check-out page for actual pricing
Write Your Own Review
You're reviewing:P+S Flamea+ 8194 shower wall clamp (wall-glass), glossy gold
Customer Questions
No Questions

test Engels